Оригинальное название:
dbx 266xs - Компрессор/вентиль
Dbx DBX266XSV:
Specification
Function:
Compressor/gate
Inputs:
2 x XLR (pin 2 hot)
2 x 1/4" TRS phone
Input Impedance:
>40kΩ balanced, >20kΩ unbalanced
Maximum Input Level:
>+22dBu, balanced or unbalanced
Outputs:
2 x XLR(pin 2 hot)
2 x 1/4" TRS phone
Output Impedance:
at +4dBu: 100Ω balanced, 50Ω unbalanced
at -10dB: 1kΩ balanced, 500Ω unbalanced
Maximum Output Level:
>+21dBu balanced/unbalanced into 2kΩ or greater
>+18dBm bala
Other Connectors:
Side Chain
Type: 1/4" TRS phone, Normalled: Ring = Output (send); Tip = Input (return)
Imped, Ring = 2kΩ (output)
Maximum Levels: >+22dBu (tip/input), >+20dBU (ring/output)
Compression Threshold:
-40dBu to +20dBu
Compression Ratio:
1:1 to infinity:1, variable
Attack Time:
Scalable program-dependent AutoDynamic
Release Time:
Scalable program-dependent AutoDynamic
Slope:
OverEasy or hard knee, selectable
Make-up Gain:
-20dB to +20dB
Gate Threshold:
-60dBu to +15dBu
Ratio:
1:1 to 4:1 expansion
Gate Rate:
Attack: <100µSec (from maximum depth)
Frequency Response:
FR: 20Hz to 20kHz, +0/-0.5dB
Dynamic Range:
>114dB, unweighted
Noise:
<-93dBu, unweighted (22kHz measured bandwidth)
THD + N:
<0.02% typical on any amount of compression @ 1kHz
Crosstalk:
<-95dB, 20Hz to 20kHz
CMRR:
>40dB, typical, >55dB @ 1kHz
Operating Temperature:
32°F to 113°F (0°C to 45°C)
Power Requirements:
100~120VAC 50/60Hz
Dimensions (WxDxH):
19 x 5.75 x 1.75" (483 x 146 x 45mm)
Specialties:
SMPTE IMD: <0.2%