Оригинальное название:
Crown Audio XTi 2002 Two-channel Power Amplifier Bundle with 2x 20 XLR-XLR Cabl
Output Power:
1000W at 2 Ohms Stereo (per Channel) 800W at 4 Ohms Stereo (per
Damping Factor:
20Hz to 1kHz > 500
Input Sensitivity:
1.4Vrms
Input Impedance:
20k Ohms (Balanced) 10 kOhms (Unbalanced)
Gain:
32.9dB at 1kHz, 8 Ohm Rated Output
Frequency Response:
(at 1 watt, 20Hz - 20kHz) +0dB, -1dB
Signal-to-Noise Ratio:
XTi1002/2002/4002: 100dB (A weighted) XTi6002: 103dB (A weighte
Total Harmonic Distortion (THD):
< 0.5%
Connections:
Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from inpu, one per channel. Output Connectors: Two Neutrik Speakon NL4MP, connects to HiQnet network.
Controls Front Panel:
Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC p
Indicators:
Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (ma, illuminates when the amplifier is ready to produce audio. Clip, turns on at the threshold of audible distortion Temp Indicator, illuminates under excessive temperature conditions Power Indic
Cooling:
Proportional speed fan with front-to-rear airflow.
Power Consumption:
8.3A; no more than 38W at idle
Power Requirements:
100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions:
19 x 3.5 x 12.25 (48.26 x 8.89 x 31.11cm)
Specialties:
DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer Protection for Short Circuits, Overloads, and Overheating